If you searched this because a contractor just quoted you a number and you’re wondering if it’s fair — or because your roof is aging out and you’re trying to budget — here’s the honest range, not a lead-gen teaser that makes you fill out a form to see it.
For a typical DFW home (roughly 1,500-2,500 square feet of roof), a full replacement runs $8,500 to $25,000, with most jobs landing between $12,000 and $16,000. Where you fall in that range comes down to three things: material, roof complexity, and whether you’re paying cash or an insurance claim is covering it.
Cost by material
Roofers price in “squares” — one square covers 100 square feet. For a 2,000-square-foot roof (a common size for a DFW single-story), here’s roughly what each material runs installed:
- 3-tab asphalt shingles: $7,000-$10,000. Cheapest option, shortest lifespan, and most insurance carriers are moving away from covering this class of shingle on hail claims.
- Architectural (dimensional) shingles: $9,500-$15,000. The standard choice for most DFW replacements — better wind and impact rating than 3-tab, and what we install on the majority of jobs.
- Impact-resistant (Class 4) shingles: $12,000-$18,000. Worth asking your insurance agent about — some Texas carriers offer a premium discount for Class 4 roofs, since they’re rated to withstand hail without granule loss.
- Standing seam metal: $18,000-$35,000. Higher upfront cost, 40-60 year lifespan, and increasingly popular in DFW for homeowners planning to stay long-term.
- Tile: $20,000-$40,000. Less common on DFW residential roofs than shingle or metal, but it’s out there, especially on older builds.
What actually moves the price within a material
Two roofs with the same square footage and the same shingle can still land $3,000-$4,000 apart. What drives that:
- Roof pitch. A steep roof (common on newer DFW builds with more architectural detail) adds 15-25% to labor — harder to work on, slower to install, more safety equipment.
- Tear-off layers. If there’s already a layer of shingles on there from a prior “roof over,” removing it adds $1,000-$3,000.
- Decking condition. You don’t know what’s under the shingles until they’re off. Rotted or hail-punctured decking runs $75-$125 per sheet to replace — not something you can quote sight-unseen, and not something an honest roofer will pretend to know before tear-off.
- Valleys, penetrations, and roof lines. More chimneys, skylights, and roof-plane intersections mean more flashing work — add $500-$2,500 depending on complexity.
- Permit fees. DFW cities range from about $115 to $500 depending on the municipality — Southlake, Dallas, and Fort Worth all price permits differently.
- Season. Roofing demand spikes after major hail events (spring is DFW’s hail season), and pricing across the industry runs 10-20% higher during that peak. Booking during a slower stretch, when the schedule allows it, can help.
If insurance is paying for it
This is where the number changes shape entirely, and it’s worth separating from a cash-pay replacement.
If a hailstorm damaged your roof and your claim gets approved, your carrier is paying for the replacement — you’re paying your deductible, which on most Texas homeowner policies runs somewhere between $1,000 and $5,000 (often a percentage of your dwelling coverage rather than a flat number — check your policy). The insurance company’s own adjuster and the contractor’s documentation determine the final claim amount, not a quote you’d get for paying cash.
This is where the quality of your documentation matters more than almost anything else in the process. An adjuster working off a ladder-and-clipboard inspection sees less than one working off dated, annotated drone photos showing granule loss, cracked seals, and impact marks across every slope. We use EagleView-certified AI drone inspection on every claim we work — same-day, no obligation — specifically because a thorough report is what gets a fair claim approved instead of a partial one.
A number worth trusting — or not
If a quote comes in well outside these ranges in either direction, ask why. A number that’s dramatically low is often a sign of corners about to get cut (undersized crew, no permit pulled, cheaper underlayment than quoted) — a pattern we’ve seen plenty from the storm-chaser crews that show up after a hailstorm and are gone before a warranty issue would ever surface. A number well above range should come with a clear explanation — steep pitch, multiple tear-off layers, decking replacement — not just “that’s our price.”
Get a real number for your roof
The ranges above are DFW averages, not your roof. The only way to get an actual number is a real inspection — square footage, pitch, material condition, and (if a storm’s involved) documented damage.
Texan Roofworks is veteran-owned and woman-owned, with crews working DFW year-round, fully insured with $2M in general liability, and EagleView certified for drone inspection. We’ll come out, document what’s actually there, and give you a written number — free, no obligation, whether you’re filing a claim or paying cash.
Call (972) 584-7849 or book a free inspection.
FAQs
Does homeowners insurance cover roof replacement in Texas?
Usually yes, if the damage is from a covered peril — hail and wind are the most common in DFW. You’ll pay your deductible; the carrier covers the rest, based on the approved claim amount. Wear-and-tear or age-related deterioration typically isn’t covered.
How long does a roof replacement take?
Most DFW residential replacements take one to three days, weather permitting. Larger or more complex roofs — steep pitch, multiple layers to tear off, extensive decking repair — can run longer.
What’s the difference between 3-tab and architectural shingles?
3-tab shingles are flat, uniform, and cheaper, but rated for lower wind speeds and shorter lifespan (typically 15-20 years). Architectural shingles are thicker, dimensional, rated for higher wind resistance, and typically last 25-30 years — most DFW replacements today use architectural.
Is a cheaper roofing quote ever a red flag?
It can be. A quote well below the going range for your material and roof size is worth asking hard questions about — crew size, permit status, underlayment quality, and whether it’s a local, licensed company you can find again next year if something goes wrong.
